Hot Work Safety Inspection Checklist | Free Downloadable Template
1. Introduction
Hot work activities, such as welding, cutting, grinding, and soldering, pose significant fire, explosion, and health hazards. Without proper controls, these operations can result in property damage, injuries, or fatalities.
A Hot Work Safety Inspection Checklist ensures that all safety measures are in place before, during, and after the task, in compliance with OSHA, NFPA, and industry best practices.
2. Purpose of the Checklist
- To verify that fire prevention and control measures are in place before starting hot work.
- To ensure worker PPE and safety equipment are available and functional.
- To confirm that the work area is safe and authorized for hot work activities.
- To support compliance with hot work permits and legal safety regulations.
3. Detailed Hot Work Safety Inspection Checklist
| Inspection Item | Yes | No | N/A | Remarks |
|---|---|---|---|---|
| Hot Work Permit | ||||
| Valid hot work permit obtained before starting work | ☐ | ☐ | ☐ | |
| Permit approved by an authorized person | ☐ | ☐ | ☐ | |
| Permit displayed at the work site | ☐ | ☐ | ☐ | |
| Work Area Safety | ||||
| Flammable materials removed within 35 feet | ☐ | ☐ | ☐ | |
| Combustible materials covered with fire-resistant blankets or guards | ☐ | ☐ | ☐ | |
| Floors swept clean of combustibles | ☐ | ☐ | ☐ | |
| No flammable liquids present in the area | ☐ | ☐ | ☐ | |
| Fire Safety Measures | ||||
| At least one fire extinguisher available and functional | ☐ | ☐ | ☐ | |
| Fire watch personnel assigned and trained | ☐ | ☐ | ☐ | |
| Sprinklers, hoses, or water buckets ready if required | ☐ | ☐ | ☐ | |
| Fire alarm system operational | ☐ | ☐ | ☐ | |
| PPE & Equipment | ||||
| Workers wearing appropriate PPE (helmet, gloves, goggles, face shield) | ☐ | ☐ | ☐ | |
| Welding screens used to protect others from sparks/UV light | ☐ | ☐ | ☐ | |
| Tools and equipment inspected before use | ☐ | ☐ | ☐ | |
| Gas cylinders stored upright, with caps on when not in use | ☐ | ☐ | ☐ | |
| Ventilation & Fume Control | ||||
| Adequate ventilation available for confined spaces | ☐ | ☐ | ☐ | |
| Fume extraction systems in place if required | ☐ | ☐ | ☐ | |
| During Hot Work | ||||
| Work monitored continuously by trained personnel | ☐ | ☐ | ☐ | |
| Sparks and slag controlled to prevent spread | ☐ | ☐ | ☐ | |
| Post-Work Inspection | ||||
| Work area inspected for at least 30 minutes after completion | ☐ | ☐ | ☐ | |
| Fire watch maintained during cooling period | ☐ | ☐ | ☐ | |
| All hot work equipment turned off and stored safely | ☐ | ☐ | ☐ |
4. How to Use This Checklist
- Before Hot Work:
- Conduct a complete inspection using the checklist.
- Ensure all hazards are eliminated or controlled.
- Obtain and display the hot work permit.
- During Hot Work:
- Continuously monitor the work area.
- Ensure the fire watch is actively engaged.
- After Hot Work:
- Inspect the work area for smoldering fires.
- Maintain a fire watch for the required duration.
5. Compliance Standards
- OSHA 29 CFR 1910.252 – Welding, Cutting, and Brazing
- NFPA 51B – Standard for Fire Prevention During Welding, Cutting, and Other Hot Work
- ISO 45001 – Occupational Health and Safety Management Systems
✅ Free Download:
Scaffolding Safety Inspection Checklist | Free Template
Fire Safety Toolbox Talk – Prevention, Response, and Evacuation
Machine Safety Inspection Checklist | Free Template Download
Warehouse Safety Inspection Checklist | Free Download Template
Electrical Safety Inspection Checklist | Free Downloadable Template
